McKesson Lightweight Dual Axle Wheelchair, 20-Inch Seat Width with Flip-Back Desk Arms, Elevating Leg Rests, 300 lbs Capacity

For broader adults requiring generous pelvic clearance without the unwieldy bulk of traditional steel wheelchairs, the McKesson lightweight dual-axle wheelchair with a 20-inch seat width provides an agile, fully adjustable mobility system. Engineered on a rugged carbon steel skeleton treated in a scratch-resistant silver vein finish, this manual wheelchair weighs less than 36 pounds (excluding front riggings) while safely accommodating user weight loads up to 300 lbs. It merges the structural rigidity demanded in clinical environments with the portable handling needed for everyday domestic outings.

Positioning versatility is integrated into every structural point of this 20-inch-wide chair. Its seating platform incorporates an adjustable seat depth ranging from 16 to 18 inches, allowing users to adapt thigh support to their femur length for optimal pressure reduction. Removable flip-back padded desk-length armrests swing up and out of the way for close positioning under dining tables and desks or detach completely for unhindered sliding-board transfers. Outfitted with tool-free adjustable elevating leg rests to promote lower-extremity circulation and swelling relief, dual-axle positioning plates for hemi-height foot propulsion, 8-inch front casters with 3-position vertical adjustment, precision sealed bearings, and a slim 12-inch folded width, this wheelchair delivers smooth indoor maneuvering and straightforward vehicle stowage.

Distinguishing Performance & Engineering Benefits

• Spacious 20-inch seat width provides comfortable lateral hip clearance to prevent skin chafing and pelvic crowding
• Lightweight carbon steel frame architecture weighs under 36 lbs for reduced caregiver lifting strain
• Expandable seat depth adjusts smoothly from 16″ to 18″ for tailored hamstring and under-thigh support
• Dual-axle frame brackets allow swift transition between standard seat height and low hemi-level foot propulsion
• Removable flip-back padded desk arms swing backward for unhindered lateral sliding-board transfers
• Tool-free elevating leg rests raise lower extremities to manage dependent edema and support orthopedic healing
• Precision sealed front and rear wheel bearings resist grit and hair to ensure silent, low-effort propulsion
• Three-position adjustable 8-inch front casters optimize clearance across door thresholds and uneven flooring
• Durable, lightweight black nylon upholstery resists tearing, moisture penetration, and wipes clean with ease
• Direct-engagement push-to-lock manual wheel brakes deliver steadfast security during entry and exit
• Compact lateral folding design collapses down to a 12-inch folded width for simple trunk loading and closet storage
• Certified 300 lb occupant weight rating supports dependable daily performance at home or in healthcare facilities

Technical Breakdown & Dimensions

Who Benefits Most from this 20-Inch Manual Chair

• Broad-Framed Adults: Expansive 20-inch seating space prevents lateral compression against side panels while maintaining standard door clearance.
• Post-Surgical Orthopedic Patients: Elevating leg rests allow users to raise lower limbs to relieve joint swelling, edema, and leg fatigue.
• Foot-Propelling Stroke Patients: Dual-axle bracket enables lowering the seat-to-floor height so users can plant their heels firmly to walk the chair forward.
• Active Desk Workers & Students: Desk-length armrests allow users to slide flush under tables, desks, and dining surfaces without interference.
• Caregivers Transporting by Vehicle: At under 36 lbs with a 12-inch folded profile, this chair loads into vehicle trunks with significantly less physical strain.

Assembly, Adjustment & Routine Care Guidance

To unfold the chair, press downward firmly with flat hands on both outer seat rail tubes until the cross-brace snaps fully open and the nylon seat sling is taut. Slide the elevating leg rest brackets over the front frame pins and rotate inward until the locking pins engage. To alter seat depth, loosen the depth adjustment hardware beneath the seat rails, extend the frame to the preferred setting between 16 and 18 inches, and retighten firmly. To drop the chair to hemi height, remove the rear axle mounting bolts, relocate them to the upper bracket position, and align the 8-inch front casters into the corresponding fork holes to ensure a level ride. Always engage both push-to-lock hand brakes forward before attempting any transfer. Clean the silver vein steel frame and nylon upholstery with a damp cloth and mild detergent or hospital surface wipes, drying thoroughly with a clean towel.

Explore More Mobility Solutions at All Care Store

At All Care Store, we are committed to enhancing everyday independence and clinical care through high-quality, dependable medical equipment distributed quickly nationwide from Plano, Texas. Whether you are outfitting a private home or managing patient mobility across healthcare facilities, discover our complete line of specialized mobility collections:

• Manual Wheelchairs: Explore standard, lightweight, and heavy-duty self-propelled wheelchairs built for reliable daily travel.
• Transport Wheelchairs: Browse ultra-lightweight companion chairs designed for fast vehicle loading and outpatient appointments.
• Electric Wheelchairs: Discover high-performance motorized power chairs featuring auto-folding frames and extended driving ranges.
• Bathroom Wheelchairs: Shop rust-resistant roll-in shower chairs and mobile commodes designed for safe bathroom hygiene.
• Wheelchair Ramps: Ensure step-free entryway access over door thresholds, steps, and vehicles with portable aluminum ramps.
• Pediatric Wheelchairs: Find ergonomically scaled pediatric manual wheelchairs built for growing children and school transit.