Bathing safely becomes challenging when mobility is limited, and stepping over a high tub wall poses serious fall risks. This adjustable-height transfer bench solves that problem by providing a stable bridge between bathroom floor and tub interior, allowing users to sit and slide into the bath rather than step dangerously over the edge. With height adjustment in half-inch increments and reversible armrest design, it adapts to any tub configuration and user need.
Key Features
-
Dual-column extension legs adjust seat height in half-inch increments from 16 to 21 inches for customized fit.
-
Reversible armrest and seat orientation accommodate left or right-side tub entry in any bathroom layout.
-
Aluminum and blow-molded plastic construction resists corrosion in humid bathroom environments while remaining lightweight for repositioning.
-
A-frame base design delivers enhanced stability and weight distribution across four contact points.
-
Extra-large locking suction cups with pull-tab release secure bench firmly to tub floor during transfers.
-
Tool-free assembly with removable back and arms enables quick setup and compact storage when not in use.
Specifications
| Attribute |
500 lbs Capacity |
Plastic 3-Section Gray |
| Weight Capacity |
500 lbs |
400 lbs |
| Frame Material |
1" aluminum tubing |
Aluminum with blow-molded plastic seat |
| Seat Dimensions |
25.5" W × 18" D |
Standard transfer bench width |
| Height Range |
16" to 21" (1" increments) |
16" to 21" (½" increments) |
| Back Depth Adjustment |
18" to 19" (½" increments, 3 positions) |
Fixed backrest |
| Assembly |
Tool-free removable back and arms |
Tool-free back, legs, and arm attachment |
| HCPCS Code |
E0248 |
E0247 |
Ideal For
-
Post-surgery recovery when bending or lifting legs over tub edge is contraindicated.
-
Elderly adults with balance concerns who need seated bathing support to prevent bathroom falls.
-
Users with limited lower-body mobility including those recovering from hip or knee replacement.
-
Caregivers assisting patients who require stable positioning during supervised bathing routines.
-
Bariatric patients needing higher weight capacity and wider seating surface for comfort.
What's Included
- Transfer bench seat platform (aluminum or blow-molded plastic depending on variant)
- Adjustable height legs with dual-column extension mechanism
- Removable backrest with tool-free mounting hardware
- Reversible armrest (500 lbs variant) or attached arm support (plastic variant)
- Four extra-large suction cups with locking tabs and pull-release feature
- Assembly instructions with no tools required
Care Instructions
- Wipe aluminum frame and plastic surfaces with mild soap and warm water after each use to prevent soap scum buildup.
- Inspect suction cups weekly for cracks or wear; replace if adhesion weakens or tabs break.
- Check leg extension pins monthly to ensure secure locking in height adjustment holes.
- Avoid abrasive cleaners or bleach on plastic components to prevent surface degradation.
- Store in dry area when not in regular use; aluminum resists rust but prolonged moisture exposure may affect hardware.
- Pull suction cup tabs fully before attempting to reposition bench to avoid damaging tub surface.
Warranty Information
Both variants include a Limited Lifetime Warranty covering defects in materials and workmanship under normal residential use. Warranty does not cover wear items such as suction cups or damage from improper assembly, misuse, or commercial application. Contact the manufacturer with proof of purchase for warranty claims.
Quality & Compliance
This transfer bench meets HCPCS codes E0247 and E0248 for insurance billing and documentation purposes. The design features no exposed hardware that could injure users during transfers, addressing safety standards for bathroom assistive devices.
FAQs
Q: Can this bench fit standard residential bathtubs?
A: Yes, the reversible armrest design and adjustable legs accommodate most standard tub widths and heights. Measure your tub's interior width and wall height to confirm the 16-21 inch adjustment range works for your setup.
Q: What is the difference between the two variants?
A: The 500 lbs capacity model uses 1-inch aluminum tubing throughout with adjustable backrest depth and 1-inch height increments. The plastic variant features blow-molded seat and backrest, A-frame construction for stability, half-inch height increments, and 400 lbs capacity.
Q: How do I switch the bench from left-side to right-side entry?
A: Remove the armrest using tool-free detachment, rotate the entire bench 180 degrees, and reattach the arm on the opposite side. This takes under two minutes and requires no tools.
Q: Do the suction cups work on textured tub floors?
A: The extra-large suction cups provide strong hold on smooth acrylic and fiberglass surfaces. Textured or non-slip tub floors may reduce suction effectiveness; test adhesion before full weight-bearing use.
Q: Is assembly difficult for someone with limited hand strength?
A: No tools are needed. Legs, back, and armrest snap into place with push-button or slide mechanisms designed for easy assembly without gripping screws or using wrenches.
Why Buy from All Care Store?
- Free shipping on all orders within the USA (T&C apply)
- 30-day hassle-free returns on unused products
- Dedicated customer support: 1-888-889-6260 or contact@allcarestore.com
- Shipped from Plano, Texas — fast nationwide distribution
